top of page


PV systems for large agricultural fields and animal farming

Anker 1


tracker systems that follow the sun during the course of the day and thus generate optimal electricity yields. At the same time, large harvesting machines can drive between the individual trackers and cultivate the arable land. Ideal also for animal husbandry.

Bildschirm­foto 2023-01-20 um 14.23.48.png

State-of-the-art single-axis tracker


  • Almost unrestricted agricultural use

  • Up to 30% more power yield compared to fence systems

  • Optimized for bifacial modules of different sizes due to variable row widths

  • Adaptable to soil conditions

  • Terrain-specific 3D backtracking

  • Independent row control

  • Fast and safe installation

  • Galvanized steel construction "Made in Germany

Bildschirm­foto 2023-01-20 um 14.27_edit

Powerful Bifacial Modules
Our AgriTrackers are optimized for the use of bifacial modules with a power of up to 670 watts. Depending on the static calculation, they are divided into fields of 4-6 modules. Each field is held by a support pillar. The row length is up to 120 m. The centrally mounted motor turns the particularly stable axis on which the modules are solidly mounted with a patented support arm.

Compared to trackers for open space plants, a higher elevation and an extended row width is achieved according to the requirements for agricultural cultivation, which is possible to a large extent without restrictions. Only a biodiverse planted strip under the modules is not harvested with and improves the species richness of agriculture.

High uniform yield
Unlike, for example, a fence system with vertically mounted modules, the continuous orientation to the sun results in a relatively uniform yield profile as well as a significantly higher output of up to 30%. 

Bildschirm­foto 2023-01-20 um 14.33.34.png

The setup of our AgriTracker is uncomplicated. The soil profiles are rammed to a uniform height according to the digitized soil profile. With solid ring anchors, the welded steel axles are mounted on top. The forged support arms, on which the modules are directly mounted, eliminate the need for a frame. Control can be separate for each row and places the modules in a vertical position, e.g. for tillage or harvesting. A wind sensor moves the modules to a horizontal position in the event of a storm. The inverters are normally placed in the middle of each row.The solid design of all components allows a warranty of up to 20 years with regular maintenance!

Also ideal for animal husbandry
Due to the higher elevation and the variable spacing, our TrackerPV systems are ideal for animal husbandry.Cows or horses can pass unhindered and find sufficient shade, especially in the hot midday hours, due to the almost horizontal position of the modules.The microclimate under the systems is good for the growth of the plants due to the reduction of evaporation and the protection from intense solar radiation. 

1_6 - Photo-6_edited.jpg
1_1 - Photo-8_edited.jpg

Optimal yields from sunrise to sunset

Bildschirm­foto 2023-01-18 um 16.32_edit
bottom of page